Pimp My Batmobile!

Archive for the ‘Other Scales’ Category

So here’s a look at the current mock-up of the 1/25 snap-kit box art. This is the highly anticipated Alex Ross art, though from what we hear, they’re using elements styled in different formats for the new products. So, maybe we’ll get a more elaborate setting or treatment in the 1:25 glue kit or the slot cars etc. Obviously not the final packaging, since they’re still showing the aurora reissue car body as a placeholder in the background, but  – we’re starting to get excited here.

We’ve been wondering about the new Round 2 Batboat model and how different or similar it is from Polar Lights‘ first 1/25 Batboat release from 2003. (which was in turn based on but scaled up and otherwise modified from the 1967 1/32 Aurora Batboat) Well, Tim from TPM Customs picked up the model last week and sent us a report that it is identical in every way to the 2003 release with the exception of an expanded decal sheet.

Now that may not seem like a big deal, but the original 2003 Batboat kit only included a scaled up version of the Aurura decals, which while being fun and nostalgic – were actually very inaccurate. For some reason the oval bat signal emblem that goes on the fin was too small, cartoony and much darker than it should have been, making it hard to see on the model. Additionally, the hull flames were incorrect and Aurora never included anything to help the builder get the white parts of the hull or fins detailed.

Round 2 has changed that with this model. The decal set includes most of the original 1967/2003 art but adds corrected fin bats, white fin scallops, and much nicer flames, with or without the white hull sections. Plus, a few extras like a brand new oval base nameplate option that is pretty cool. R2 has again added pinstriping, like they did with their 1/32 Batmobile release which seems impractical as a wetslide option – but I applaud their efforts and for including the option.

I’ve always thought that one of the genius moves that R2 made was to scale up the original Batboat kit from 1/32 to 1/25 . This is particularly noteworthy this year, as they get their 1/25 Batmobile ready for production. If you’ve never built that 2003 PL Batboat kit you’ve got in your to-be-built model stack in the closet, or if you never picked it up the first time – this model is worth the $19 for these decal upgrades alone! Now, who’s got a good, retro 1/25 scale trailer?

(Thanks again to Tim from TPM for the decal scan)

Editor’s Note: The following post has been migrated over from our now defunct Batcave Blog and dates originally from September, 2008:

Our goal is to mix elements of the 1966 TV Batcave with some of our favorite comics stuff and some of our own inventions as well. So -

The TV Batboat is super cool but never lived in the Batcave on TV. They had to drive to the marina to get to it. That seems unlikely and awkward to us. Just slightly less goofy than having the Batmobile actually trailer it. (a la the Corgi gift pack) I always loved the idea that the cave housed EVERYTHING. So we are borrowing from the comics the idea of an underground Grotto that is a tributary to Gotham harbor. Our back-story is that perhaps Batman expanded an already existing grotto to his needs.

In the diorama – I wanted this far enough away from the center TV Atomic Pile area so we are placing it to the far right. And since that’s our cave exit, we needed a bridge for the Batmobile. And a grotto or cave lake for the Batboat that could actually handle real depth.

We started by creating a light but rigid base for the lake out of slices of pink insulating styrofoam (home depot) and used Project Glue for Foam to put them together.

Then we needed to seal it up to be able to actually support our “water.” We used these great products to seal up the seams and then provide some underwater lake effects.

We decided that the Batcave grotto would be a typical East Coast limestone based cave lake and so most of the ballast (rocks) got the grey/green mossy treatment that we see around PA a lot. It was a challenge to remember and plan for all this to be sealed underwater. We also decided that perhaps the Atomic Pile would need a cooling system so there are intake and outake pipes in the lake walls. Made from trimmed pieces of silver cable hiding hoses and then weathered and decals added.

Grotto/Lake bottom with coolant pipes and drainpipe

We built the bridge after a design that Alexander drew. I liked it because it was a little Burton-esque yet not unrealistic. We made it out of balsa, painted it silver with hammered aluminum for the texture and then weathered it and added the big rivet bolts and the non-skid surface. We dropped it into place and then foam-puttied around the struts.

We planned to fill the lake bed with clear railroad water effect resin. I wanted the Batboat to be immersed realistically in “water” but I also did not want to permanently embed my Jim Apitz-made batboat model in clear resin. So we decided to grab a spare Polar Lights Batboat hull, and mount it in the lake bottom, seal it with plastic wrap for easier removal later, then pour the resin in around it. The theory was that when we had the right water level and it had hardened – we just pop out the spare hull and put the Batboat model in its place. Well it was a great idea that we didn’t think through completely. More on that later.

Editor’s Note: The following post has been migrated over from our now defunct Batcave Blog and dates originally from January, 2008:

We decided to build the diorama in this large 6ft long glass store display case. We found this case fairly affordably from a local used store fixtures supply warehouse in Pittsburgh. It came with existing lighting but we mounted new mini fluorescent lights to the interior ceiling. We are testing out a floor-plan and getting a working base floor out of pink building Styrofoam in there to make markings.

The tricky parts of this (other than, you know – actually creating all the little bits) is working within the space contained by this display case and working front to back until we get ready to turn everything around later. We wanted a platform base to give elevation for a grotto for the batboat, and to hopefully house electrical parts.

We tried to drop in a full-length base platform but I realized it would be better with two smaller ones so we can have flexibility and maneuvering room. Here we are laying out the new floorplan and test-fitting the underflooring. You can see our markings for where the grotto will be.

Marking the Batcave floor.

Laying out some goodies for a test fit.

More gadgets placement.